D connector PCB footprints don't get much smaller than this range from In2Connect.
Ideal for laptops, and hand-held computing devices, instruments, modems, telecommunication equipment, etc. these 'SuperSlim', right angled D connectors are available with ONE, as well as the usual two rows of thro' board contacts.

The first row of contact tails on the normal 2 row configuration has a set-back distance of only 1.8mm (1.2mm on the single row version), whilst the whole connector, at 10.5mm from front to back is half the size of the accepted norm for UK right angle D types.

Compatible and interchangeable with all D Subminiature connectors to DIN 41652 they have a high temperature moulding (UL94V-0) to withstand Infra Red and Vapour Phase soldering techniques at processing temperature of up to 230ºC for 30~60 seconds, and an operating temperature of -65º to +125º.

"To boldly go where most D connectors can't ~ Jim?"