Waterproof D-sub connectors

Waterproof D Waterproof to IEC 529, IP67 specifications

Electronic equipment used in harsh environments require connectors that can withstand moisture, dust and the ingress of other harmful materials. This water resistant D-Subminiature connector 'system' includes standard D configuration as well as High Density, Monobloc mixed layout, and Filtered options, all of which can be used in applications where moisture, high humidity, water or dust could be a problem. These types are UL and CSA approved.
Because of the wide range of configurations available, these connectors are built to order.

Features

Synthetic frame with O-ring for sealing connector to panel.

Connectors internally 'sealed' to prevent ingress around the contacts.

Front or rear panel mounting options.

Cable-end versions for harnessing.

Shells available in yellow chromate, tinned and dimpled, or gold.

Mounting threads in 4-40 UNC or M3.

Machined precision contacts, plated classes 1, 2 or 3 for high reliability.

Available from 9 to 78 ways plus Monobloc and EMI/RFI filtered series.

All termination styles available.

Water resistant hoods and sealing caps.

Materials

	Shell - Brass, Steel Tin plated (Plugs EMI/RFI dimpled) Gold plated Yellow chromate zinc
	Insulator - Polyester GF, UL 94V-0
	Contacts Copper alloy, plated hard acid gold over nickel Class 3 = 50 cycles Class 2 = 200 cycles Class 1 = 500 cycles

Electrical

	Current Standard 5A. HDD 3A.
	Voltage Standard 125V. HDD 60V.
	Test voltage 1000V
	Contact Resistance Before use - max 10m After use - R max 10m Insulation Resistance - > 5 G

Mechanical

Mating/unmating forces

No. contacts Standard HDD

9 15

<30N <50N

15 26

<50N <84N

25 44

<83N <120N

37 62

<123N <170N

50 78

<167N <200N

Mechanical Operations

50 cycles

200 cycles

500 cycles

Environmental

Working temperature : -25 to +125 degrees C

Degree of protection - IP67

6 =	Complete protection against contact with live or moving parts inside the enclosure. Protection against ingress of dust.
7 =	Protection against immersion in water. It shall not be possible for water to enter the enclosure under stated conditions of pressure and time.

Types

Plug and socket solder bucket
Plug and socket straight PC
Plug and socket 90º PC
High Density plug and socket solder bucket
High Density plug and socket straight PC
High Density plug and socket 90º PC

Filter plug solder bucket

Filter plug straight PC

Filter plug 90º PC

capacitance 180/370/830/1300pF

High Density filter plug straight PC
High Density filter plug 90º PC
Plug and socket solder bucket combination
Plug and socket straight PC combination
Plug and socket 90º PC combination
Monobloc 3W3, 5W5, 8W8, 2W2C, 3W3C
Plug and socket (without sealing frame) for harnesses
Plug and socket for front mounting
Hoods and accessories